CARRIAGE: See in the images a map showing carriage surcharges by area.

Made to order in the UK these pond liners are manufactured from a heavy duty fibreglass lay up using Lloyds approves isophthalic resin and gel coats used in boat building construction.

This is a large pond at 340 x 210 cm overall and a depth of 75 cm. This pond can be made in Green or Black. The unit will weigh around 50 kgs.

Fibreglass pond liners are far longer lasting than cheap preformed plastic or fabric liners and if you are building the pond in the last thing you want is a cheap liner to fail.

Fibreglass pond liners are incredibly strong but given there are 2.5 tonnes of water going in to the pond it is essential that the base of the unit sits on solid ground with at least 6" of WELL PACKED DOWN sand at the base. The sides need to be packed externally against the earth with sand and that watered down to make sure the unit is fully supported. You MUST NOT let the shelves around the edge "suspend" the pond base off of the well packed down sand in the bottom of the hole, the Base has to take the load and the shelves have to be supported as well.

Make sure there are NO STONES or other sharp objects that will press against the outside of the pond. Remember there is 2.5 tonnes of water in this unit when full and that is a lot of force downwards and outwards ! There are lots of tutorials on line about installing these units, MAKE SURE you watch them !

THESE ARE MADE TO ORDER IN THE UK SO NOTE THE 30 DAY LEAD TIME FOR IT TO ARRIVE

In the Photos is a picture showing the areas that the £199 Carriage applies to, if you are outside of these areas the extra cost of carriage is shown, we will ask for this extra carriage delivery cost once you have ordered and paid for the pond / pool.

-----------------------------------

BMC ~ Barnet Marine Centre Limited

14 West Burrowfield, Welwyn Garden City, Herts, AL7 4TW

TEL: 01707 331 389 E MAIL: info@ribs.co.uk

WEB: www.ribs.co.uk